Accuracy:
2 % of reading, all ranges
Calibration Method:
Primary: Enter one primary standard
value (formazin is recommended).
Sample:Enter one sample value
determined by laboratory analysis or
calibrated portable meter.
Communication:
RS-232 and HART protocol
Current Output:
0 to 20 mA Analog, isolated, with 0.004 mA
(12-bit) resolution and capability to drive
up to 600 ohm loads
Current Output 2:
4 to 20 mA Analog, isolated, with 0.004 mA
(12-bit) resolution and capability to drive
up to 600 ohm loads
Display:
Graphic dot matrix LCD, 128 x 64 pixels
with LED backlighting; 1/2 inch (13 mm)
main character height; 1/8 inch (3 mm)
auxiliary information character height;
menu screens contain up to six text lines
Enclosure Rating:
NEMA 4X
Memory Backup:
All user settings are retained indefinitely in memory (EEPROM)
Mounting Configurations:
Panel, surface, and pipe (horizontal and
vertical) mounting
Operating temperature range:
-20 - 60 °C at 0 - 95% RH (non-condensing)
Power requirements (Hz):
50 - 60 Hz
Power Requirements (Voltage):
180 - 260 V AC
Relays:
Four electromechanical
relays; SPDT (Form C) contacts; U.L. rated
5A 115/230 Vac, 5A @ 30 Vdc resistive
Operational Mode: Each relay (A, B, C, D)
can be driven by the measured turbidity
or detected system diagnostic conditions
Repeatability:
0.1 % of span or better
Sensitivity:
0.001 NTU
Storage conditions:
-30 °C to 70 °C
Temperature Drift:
0.01 % Zero and Span: 0.01% of span per ºC
Turbidity:
1.000 NTU with auto-ranging and
decimal point shift
Turbidity 2:
10.00 NTU with auto-ranging and
decimal point shift
Weight:
2.3 kg approximately