Prices Online Include GST      0800 50 55 66

AN-ISE sc Low cost ISE combination Ammonium and Nitrate probe (immersion) without RFID, 10 m cable

AN-ISE sc Low cost ISE combination Ammonium and Nitrate probe (immersion) without RFID, 10 m cable
Product #: LXV440.99.00012
Unit Price Contact Hach

Trustable results for ammonium and nitrate

Looking for new ways to stretch money and reduce consumable cost? We have the perfect solution for you! Our new combination sensor with ion-selective electrode (ISE) technology was developed to measure both NH4 and NO3 at the same spot. What is unique? The most significant interferences of K and Cl are simultaneously compensated by integrated ISE electrodes, ensuring accurate results 24h/7days.

Easy handling with Cartrical cartridge plus

The compact Cartrical cartridge contains four electrodes which are calibrated to each other before leaving the factory. Through the newly developed Cartrical plus technology, the factory calibration is automatically identified after replacing the cartridge. The compact design does away with tiresome handling and adjustment of individual electrodes: just unscrew the old cartridge, plug in the new one and the sensor is immediately ready to measure.

Simple and intuitive operation

With a menu-guided operation and step-by-step guide with clear text, the combination AN-ISE sc sensor is very easy to use. It works directly with every SC controller without complicated wiring or set up procedures: just plug and play. The common SC controller platform allows intuitive usage not only for ammonium and nitrate but also for other parameters like pH, DO, etc.

Always under control

In combination with SC1000 controller alert messages from AN-ISE sc sensor can be transmitted to the control room or by SMS / e-mail to a mobile phone. By this you are always informed about the status of your processes, early enough to react quickly.

Rely on Hach's application know how

You can trust our ISE experience gathered in many waste water applications around the world. Based on this we have developed the next ISE generation to fulfill your requirements even better. Our application team is always close by.

What's included?

Ammonium & Nitrate probe, sensor cartridge, user manual

Specifications

Accuracy: 5% of measured value +0.2 mg/L (with standard solutions) NH4-N and NO3-N
Cable Length: Standard: 10 m (33.8 ft)
Extension cables are available as an option in the following lengths:
5, 10, 15, 20, 30, 50 m (16.4, 33.8, 49.2, 65.6, 98.4, 164 ft)
Maximum overall length: 100 m (328 ft)
Calibration Method: Factory calibrated sensor cartridge (CARTRICAL), 1 and 2 point matrix correction
Controller Compatibility: SC200, SC1000, SC4500. All controllers sold separately
Data Transfer: Current output, relays and bus communication via SC controller
Dimensions (D x L): 84.5 mm x 320 mm
Flow: < 4 m/s max. velocity
Includes: Ammonium & Nitrate probe, sensor cartridge, user manual
Installation Angle: 45 ° ± 15 ° (vertical in flow direction)
Length: 320 mm
Lower Limit of Detection (LOD): 0.2 mg/L NH4–N and NO3-N
Material: Cartridge: stainless steel (1.4571), PVC, POM, ABS, NBR
Cleaning unit: TPE, PUR, stainless steel (1.4571)
Sensor: stainless steel (1.4571), ASA + PC, silicon, PVC and PU
Measurement method: Potentiometric ion-selective electrodes for ammonium, potassium, nitrate and chloride, reference system and temperature sensor
Measuring Interval: Continuous
Measuring uncertainty: ± 5 % + 0.2 mg/L (with standard solution) NH4-N and NO3-N
Operating temperature range: Air: -20 - 45 °C (-4 - 113 °F)
Parameter: NH4-N and NO3-N
pH Range: 5 - 9 pH
Process Connection: 1 inch thread
Protection Class: IP68
Range: 0 - 1000 mg/L NH4-N
0 - 1000 mg/L NO3-N
0 - 1000 mg/L K+
0 - 1000 mg/L Cl-
Repeatability: ± 5 % of the measured value (with standard solution)+ 0.2 mg/L NH4-N and NO3-N
Response time: < 3 min
Sample Pressure: 0.3 bar max.
Sample Temperature: 2 - 40°C (35.6 - 104°F)
Sensor Cartridge: Automatic import of factory calibration data, typical lifetime 6 months
Sensor Immersion Depth: 0.3 - 3.0 m
max. 0.3 bar (4.4 psi) pressure
Storage conditions: 5 to 40 °C (41 to 104 °F) sensor cartridge
Warranty: 12 months
Weight: 2.38 kg
What's included?: Ammonium & Nitrate probe, sensor cartridge, user manual