Prices Online Include GST      0800 50 55 66

Hach BioTector B7000i Online TOC Analyser, 0-20,000 mg/L C, 1 stream, 115 VAC

Hach BioTector B7000i Online TOC Analyser, 0-20,000 mg/L C, 1 stream, 115 VAC
Product #: B7ABAA052AABAA2
Unit Price Contact Hach

Worry-free TOC with Smart Design

The B7000i comes with a built in self-cleaning sample line and reactor. This enables the B7000i to deliver trustworthy results even if your water contains high levels of fats, oils, greases, sludge and particulates or has pH swings.

Easy Handling

All B7000i come with unique oversized tubing which eliminated the need for filtration and you can be sure to have a fully representative sample. The special tubing also prevents clogging as well as sample contamination.

Superior Reliability

Using BioTector’s internationally proven and patented Two Stage Advanced Oxidation technology the B7000i delivers maximum reliability, accuracy and availability with a MCert certified uptime of 99.86%. In addition no calibration or maintenance is required between 6-month service intervals.

Flexible field of application

Depending on the type of application, the instrument can operate across a very wide measuring range. The B7000i analyser also has multistreaming capabilities with up to 6 process streams possible. Additionally, it can be adapted for indoor or outdoor use.

Low Cost of Ownership

Installing a B7000i provides cost savings through optimizing processes by decreasing chemical dosing, waste reduction, reducing samples processes and lowering overall plant operation costs.

What's included?

Includes: B7000i Analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, CO₂ Filter & B7000i User Manual

Specifications

Ambient Temperature: 5 to 40 °C (41 to 104°F)
Air conditioning and heating options are available.
Communication: Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)
Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available
Cycle Time: From 6.5 minutes, depending on range and application
Data Storage: Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyser in the SD/MMC card.
Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyser in the SD/MMC card.
Display: High contrast 40 character x 16 line backlit LCD with CFL backlight
Drain Pressure: Typically ambient (for applications with high drain pressure, optional systems are available)
EExp / Hazardous Location: Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1
Enclosure Rating: IP44; optional IP54 with air purge
Exceedance Tracking: Full exceedance tracking to maximum range
Expected Measuring Range: High range > 5000 mg/L
Humidity: 5 - 85 % , non-condensing
Languages: English
Lower Limit of Detection (LOD): 0.06 mg/L C
Measurement method: Infrared measurement of CO2 after oxidation
Multi-Stream: 1, 2, 4 and 6 streams
Number of Channels: 1
Number of streams: 1
Outputs: 4 - 20 mA
Oxidation Method: Patented Two-Stage Advanced Oxidation Process using Hyroxyl Radicals.
Parameter: TOC, TIC, TC, VOC, after correlation COD, BOD
Particle Size: Up to 2 mm, soft particulates
Permissible Chloride Range: Up to 30%
Power requirements (Hz): 60 Hz
Power Requirements (Voltage): 115 V AC
Power supply: TOC/TIC (115VAC)
Range: 0 - 20000 mg/L C
Range Selection: Automatic or Manual Range Selection
Repeatability: ± 3 % of reading or ± 0.3 mg/L C, whichever is greater, with Automatic Range Selection
Response time: TOC 6.5 minutes
Sample Inlet Temperature: 2 - 60 °C
Sample Volume: Up to 8.0 mL
Service Interval: 6 months service intervals
User Interface: Microcontroller with membrane keyboard
Warranty: 12 months
Weight: 90 - 120 kg
Enclosure weight may change depending on system optional features.
What's included?: Includes: B7000i Analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Dip Tubes, CO₂ Filter & B7000i User Manual