flow rate (results 1-16 of 16)

Hach Flow   Be Confident in Your Flow Data.      Hach's flow products and services have a proven track record of creating industry

Conditioning Refregeration Ovens Dryers Series V4, FLOTECT Vane Operated Flow Switch Rugged and reliable the Series V4 Flotect® flow switch operates automatically to protect equipment and pipeline systems

Now Dissolved Air Flotation (DAF) Optimisation Does your facility dose chemical based on flow rate? This can lead to wasted chemicals, increased hauling costs, and potentially fines. Our suspended solids sensors

Quote Optimize Every Stage of Wastewater Treatment: Click on the process flow dots to learn more. Collection Systems Primary Treatment Secondary Treatment Tertiary Treatment Solids Handling

range please contact us on 0800 50 55 66 Trimec DualPulse The Trimec Dualpulse insertion flow transducer is an innovative design combining well proven technology with modern engineering materials to provide a

in installations where long straight pipe runs are not available. The meter incorporates Sierra’s unique dual-plate flow conditioning element to eliminate velocity profile distortions as well as swirl and

specified at purchase, provided that the original design parameters of the system (e.g. flow rate, UV transmittance) are not modified and that maintenance is performed in accordance with the UV system operation

control has typically been a manual operation, based on periodic jar test results and flow pacing. It has been difficult for food processors to find reliable systems for automatically adjusting dosage of coagulants

TrojanUV   There are over 11,000 municipal TrojanUV system installations across 100 countries, with a collective flow rate of over 70 billion gallons every day. This is the largest municipal UV installation base in

a detector or sensor.  For example, this method would be used to determine the UV lamp output settings on continuous-flow UV reactors.  The UVT value is also used for the compliance monitoring of UVT analyzer

Silica pH Alkalinity Hardness Iron Chloride Free & Total Chlorine Total Organic Carbon (TOC) Flow Rate Temperature Influent/Raw Water Every efficient cooling strategy starts with the quality of your source water

intervals often leads to overdosing or underdosing with chemical control. Overdosing occurs when control continues at the same rate even when phosphorus levels are low. Underdosing happens when phosphorus levels

) value or are you adjusting sludge retention time (SRT)? Based on real-time data like those for flow, TOC, DO, and MLSS, Claros Process Management systems continuously monitor the actual inflow load and plant

ability to use COD as a surrogate for BOD, correlating it to BOD on a plant-by-plant basis if influent characteristics are constant. F Flow Your effective wastewater treatment includes measurement of standard

Valve Position Nitrogen Dosing Rate Phosphoric Acid Liquid Feed Rate Sodium Hypochlorite Liquid Feed Rate Reductant Liquid Feed Rate Acid Liquid Feed Rate Caustic Liquid Feed Rate Coagulant Liquid Feed Rate RTC Manifold Pressure Setpoint, Computed RTC Valve Position Setpoint

dosed into the feed water—this helps to speed up clumping and settling. Typically, chemical is dosed to the DAF based on flow rate, but dosing based on flow ignores one major factor- the solids concentration! This leads to under- and over-dosing which could waste chemicals, increase