Prices Online Include GST      0800 50 55 66

SC1000 Multi-parameter Universal Controller Display Module with Modbus TCP/IP

SC1000 Multi-parameter Universal Controller Display Module with Modbus TCP/IP
Product #: LXV402.99.10002
Unit Price Contact Hach

Plug-and-Play Operation

there's no complicated wiring or set up procedures with the SC1000 controller. Just plug the sensor into a Probe Module and it is ready for use without special ordering or software configuration.

Mix and Match Digital Sensors

Any of Hach's digital sensors and analyzers can be plugged into the Probe Module. Choose from Hach's line of digital sensors: dissolved oxygen, pH, ORP, conductivity, turbidity, suspended solids, nitrate, etc. and analyzers: ammonium, phosphate, etc. Use them in any combination.*

Flexible Input/Output Options

Communication and relay options for the SC1000 controller can be configured to suit any situation. Available configurations for a single Probe Module include: • up to 4 relay contacts for alarm and control functions, • up to 12 analog outputs for measured values, • up to 12 analog or digital inputs from non-digital sensors (i.e., flow or pressure sensors), • up to 8 digital inputs from digital sensors, • select from multiple network card options such as MODBUS®, PROFIBUS DP, and more."

Expandable and Upgradeable

The SC1000 controller can adapt to your needs. Change probes without changing the controller. Probe Modules can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not become obsolete for the foreseeable future.

Advanced Communication Options

Use the SC1000 controller for hassle-free communications. Advanced communication features include: Modbus TCP/IP. The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or your organization's network.

What's included?

Display module with communication (as appropriate), basic user module

Specifications

Alarm: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Analog Output Functional Mode: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Certifications: European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Communication: Modbus® (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
Profibus® DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Dimensions (H x W x D): 315 mm x 242 mm x 150 mm
Display: QVGA, 320 x 240 pixels
Display Viewing Area: 111.4 x 83.5 mm
Enclosure Rating: IP65
GSM option: Without GSM Module
Inputs: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Material: Plastic
Material Enclosures: Polycarbonate
Mounting: Surface, panel, and pipe (horizontal and vertical) with optional sun shield
Mounting Configurations: Surface, panel, and pipe (horizontal and vertical) with optional sun shield
Operating temperature range: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Output: Up to 12 analogue 0/4-20 mA, maximum impedance 500 Ohms per probe module.
Additional analogue outputs with additional probe modules. Optional digital communcations via Modbus (RS485) and Profibus DP/V1.
Outputs: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Power requirements (Hz): 50/60 Hz
Power Requirements (Voltage): 100 - 240 V AC, 24 V DC
Relays: Up to four SPDT, user-configurable contacts rated 100 to 230 VAC, 5 Amp resistive maximum per probe module. Additional relays are available with additional probe modules.
Storage conditions: -20 to 70 °C (-4 to 158 °F), 0 to 95% relative humidity, non-condensing
Warranty: 1 year
  12 months
Weight: Approximately 6.5 kg (depending on configuration)
What's included?: Display module with communication (as appropriate), basic user module